ST-RG60-9 Tiltable Roller Resistance Furnace
Ⅰ. Applications
RG60-9 tiltable roller resistance furnace is mainly used for gas carburizing,gas carbonitriding and bright quenching& heating small parts with different shape,such as steel balls,bushins,pins,tapping screws,standard parts,chains are made of high-speed tool steel,die steel,martensitic stainless steel,titanium alloy and such metal materials.
Ⅱ. Features
1.This furnace is heated by resistance,controlled by solid state relay and intelligent instrument of Japan conductive company,and using PID adjusting method,has the advantages of accurate temperature control,simple operation,stable performance.
2.Working zone uses sealed cylinder-shaped chamber furnace made of imported high temperature stainless steel,it rotates automatically after the workpieces are putting into the furnace chamber to make the workpieces be heated
uniformly.It can also be passed into various gas to meet various technological requirements of workpieces.
3.The furnace body is supported by a bracket,can tilt upward or downward under the control of tilt unit,and can discharge automatically when it's tilting downward.
Ⅲ . Technical parameters
1.Working power supply | AC/3-phase 4-wire/380V/50Hz |
2.Rated power | 60Kw |
3. Rated temperature | 950℃ |
4.Temperature control way | PID power regulation,instrument of Japan conductive company |
| ±1℃ |
6.Temperature uniformity | ±5℃ |
7.Heating element | 0Cr25Al5Fe+Cr resistance wire，spiral |
8.Heating element connection | Y |
| φ600×750mm |
10.load capacity of 1 batch | 150Kg |
11.Operating motor of Furnace chamber | 1 set ,1.5Kw,adjust speed by magnetic |
12.Rotating speed | 0.5-8 r/min |
13.Tilting motor of furnace body | 0.55KW Hand/electric (all in one) speed reduction unit |
14.Max Tilting Angle of furnace body | ±50 degree |
15.No-load power loss | ＜8KW |
16.No-load heating time(Normal Temp:950℃) | About 2.5 hours |
17.Shape dimension | 2300×2500×2300mm |
18. Net weight | 3.5Tons/set |
